Our expert enlightens a reader on the origins (and new interest) in RLM fixtures.
What does RLM stand for? Everyone knows what they are, how to specify them etc., but no one seems to know what RLM means. Help!
These days it means reflector luminaire manufacturer, but originally it meant reflector light microscopy. It is a fixture that is designed to project light downward, which has gained new interest in communities with Dark Sky ordinances.
Randall Whitehead, IALD
Lastest from ask randall
I would recommend a 21-inch-diameter fixture and I would have the bottom of the fixture 36 inches above the table top. That being said, depending on... read full story
If the fixtures are decorative in nature, then 70 inches to 80 inches would be the right mounting height. If they are more of an indirect light... read full story
This has nothing to do with building code. While it is less expensive electricity-wise to not install light bulbs in the recessed fixtures, I think... read full story
Live CEU Webinar: LED Lighting 204 - LED and Solid-State Lighting Opportunities for Aging Eyes, Health and Behavior
Wednesday, Oct. 14, 2-3 p.m. EDT Register for this free CEU webinar by clicking here. Webinar Overview:Learning units:AIA/CES LU (HSW) 1.0 Learning UnitIDCEC (IIDA/ASID/IDC/... read full story
Sponsored by Bock Lighting, CSL, Fanimation, Pure Lighting/Edge Lighting and USA LED Lighting Solutions. Wednesday, June 10, 2-3 p.m. EDT This free CEU webinar has... read full story
Archived CEU Webinar: LED Lighting 202 - LED and Solid-State Lighting Design Update for Residential Applications
Sponsored by Emerson, Ferguson and Pure Lighting/Edge Lighting. This free CEU webinar has already taken place, but you can watch the archived presentation on-demand by... read full story